Set Modem Interface screen

Use this screen to enable Avaya services (or another trouble-tracking service) to monitor your Avaya media server for alarms. Services personnel can dial in to this interface to fix problems as they occur. If an Avaya maintenance contract is in place, the values on this screen must be provided by the Avaya services center.

Every S8700 configuration has two modems, one for each server. However, the modems share a single analog line to the service center. If one server reports alarms or a remote service person dials in, the other modem is temporarily blocked from reporting problems until the line clears.

To set up the modem interface:

1. Type the IP address associated with the dial-up link that accesses the modem.
2. Accept the default values for any return routes unless your services representative specifically directs you to change them.

2. When you finish, click Continue.