Make Server Upgrade Permanent screen

This Make Server Upgrade screen is the last step required for completing the installation of a new software release. It sets up the server to reboot from the currently active (new) software version, instead of rebooting to the previous version.

• You do not need to change the server status to standby.
• Because the Install New Software wizard must be run on each server to upgrade it, you need to use this screen on each server after you complete a software installation. See Verification tests for details.

Caution:
If you do not commit the new software release (make it permanent), then the next time the server reboots, it runs the previous software version. Any new translations you made to the new release will be lost, and the new software must be installed again. You should commit the new software to operation when you are satisfied that it is functioning.

To make a new software release the new permanent version:

1. In the main menu under Server Configuration and Upgrades, click Make Server Upgrade Permanent.
2. On the Make Server Upgrade Permanent screen, click Enter.
3. Results appear on the Make Server Upgrade Permanent results screen. Confirm that the operation was successful. The system now runs the latest software version even if the system reboots. It is safe to continue regular telephony administration.