Avaya Support Forums

Avaya Support Forums (http://support.avaya.com/forums/index.php)
-   IP Telephony and Convergence (http://support.avaya.com/forums/forumdisplay.php?f=8)
-   -   SIP Incoming TCP Needs to be UDP (http://support.avaya.com/forums/showthread.php?t=10740)

meyer84 11-30-2015 07:42 AM

SIP Incoming TCP Needs to be UDP
I have a CM 6.3 and SM 6.3. I am testing a SIP device that registers to the SM via UDP port 5060. I am able to make outbound calls. Whenever I try to make an inbound call the call is rejected. When I trace the incoming call it is being made via TCP not UDP. The SIP device I have only does UDP so it does not recognize the TCP call. How can I make inbound calls to the device via UDP?

zakabog 12-01-2015 09:04 AM

Is the CM placing the SIP call directly to your device? As long as your Session Manager is configured to send outgoing calls via UDP, and the CM is sending the TCP call to the SM, then your call should go out to the SIP device using UDP.

meyer84 12-02-2015 05:53 AM

That was also my understanding. But the SM is sending TCP packets not UDP

derekf 12-02-2015 09:07 AM

The SM should be sending TCP to CM and UDP to the endpoint if the endpoint registered to SM using UDP. Any chance you can grab a traceSM trace from SM and post it?

All times are GMT -7. The time now is 04:57 PM.