Avaya Support Forums

Avaya Support Forums (http://support.avaya.com/forums/index.php)
-   Small and Medium Business Communications (http://support.avaya.com/forums/forumdisplay.php?f=6)
-   -   Adding IPO IP500 Trunk Card Anlg 4 V2 to inservice IP Office 500v2 8.1.57 (http://support.avaya.com/forums/showthread.php?t=3684)

docaruthers 09-18-2013 06:47 PM

Adding IPO IP500 Trunk Card Anlg 4 V2 to inservice IP Office 500v2 8.1.57
 
Is there a procedure to install a IPO IP500 trunk card anlg 4 V2 to an inservice IP Office 500v2 running on 8.1.57?

thiel2 09-18-2013 09:57 PM

Power off, pull out the base card, install the standoffs, mount the daughter card, install the screws. Put the base card back into the 500 and power up. The lines will magically appear in your configuration.

They will be in Incoming and Outgoing groups 0, which will probably interfere with your current ARS routing, so be sure to change them to something else.


All times are GMT -7. The time now is 03:51 PM.