Avaya Support Forums

Avaya Support Forums (http://support.avaya.com/forums/index.php)
-   Small and Medium Business Communications (http://support.avaya.com/forums/forumdisplay.php?f=6)
-   -   1608-i connectivity (http://support.avaya.com/forums/showthread.php?t=4771)

a32 06-23-2014 04:44 AM

1608-i connectivity
 
Is it possible to connect for example via RJ-11 outlet (for earphones) the additional DECT-device in order to make OUTGOING calls as well as through main device?

gwebster 06-23-2014 02:55 PM

Are you asking if it is possible to use a DECT wireless headset connected to the 1608-i? If you are, then the answer is yes. Plantronics and Jabra are two vendors which come to mind who support this functionality. On their websites, you will find "compatibility guides" which will help you find headsets. Pay attention to the interface cables which are required.

a32 06-24-2014 01:02 AM

Thanks for quick answer! Although I meant not absolutely that (i mainly want to use casual wired DECT telethone base with its own tube which works at 2.4 GHz) this advice very usefull too. But in this case 1608-i must have embedded wifi module for external connected DECT wireless headset. Am I right? Or I'd buy some wi-fi adapter with RJ-11 outlet in order it will work with DECT wireless headset?
Meanwhile I'm going to use OUTGOING calls (not only receive incoming) via external device so I need dialnumbering on external device. Very important I want make a calls on a long range from basic device without its headset or dial number panel!
So I return to my strarting Q: is it possible?


All times are GMT -7. The time now is 10:53 AM.