Avaya Support Forums

Avaya Support Forums (http://support.avaya.com/forums/index.php)
-   Avaya Aura & Unified Communications (http://support.avaya.com/forums/forumdisplay.php?f=2)
-   -   SBC-E Management Interface (http://support.avaya.com/forums/showthread.php?t=5781)

adrianchurchill 12-11-2014 02:31 AM

SBC-E Management Interface
 
Hi all,
I am looking for a way to find out the management interface subnet and default gateway on an Avaya SBC. I am having problems contacting the M1 interface accross the corp LAN. Can connect okay on a direct cable.

From CLIPCS prompt I can get the ip address of the interface but not subnet or default gateway.


If I am unsuccessful, and I have to rebuild the SBC, is it possible to restore the config from a previous back up?

Thanks in advance.

Adrian.

mlombardi1 12-12-2014 08:25 AM

Never understood why this isn't visible in the web interface. Even the new 6.3 version hides it.

From the command line, execute: ip route

This will display M1's (eth5 on a Dell R210 II) default gateway and subnet in slash notation.

A backup can be generated from the web interface and saved, but it can only be restored on a box that has already been provisioned with the same management IP address. You're probably screwed if you don't know the associated subnet and GW.

Fix this already Avaya.


All times are GMT -7. The time now is 01:27 AM.