Avaya Support Forums

Avaya Support Forums (http://support.avaya.com/forums/index.php)
-   Small and Medium Business Communications (http://support.avaya.com/forums/forumdisplay.php?f=6)
-   -   IP Office Select Server Edition 9N routing (http://support.avaya.com/forums/showthread.php?t=13701)

abrink 07-20-2018 04:55 PM

IP Office Select Server Edition 9N routing
 
I have a system that I have been trying to get restrictions working. ARS is not the easiest to work with server edition. I am running IP Office v10.0.0.4.1 build 1

Primary Server - IP phones programmed
* Have users that will have restrictions from local - instate LD - National - International
* Have users that will display different outbound caller ID's, and group of phones that have the same outbound presentation.

Secondary Server - no phones programmed

Gateway 1 - Digital & analog users, has SIP and PRI circuit
* Have users that will have restrictions from local - instate LD - National - International
* Have users that will display different outbound caller ID's, and group of phones that have the same outbound presentation.

Gateway 2 - Digital & analog users
* Have users that will have restrictions from local - instate LD - National - International
* Have users that will display different outbound caller ID's, and group of phones that have the same outbound presentation.

Gateway 3 - Digital & analog users
* Have users that will have restrictions from local - instate LD - National - International
* Have users that will display different outbound caller ID's, and group of phones that have the same outbound presentation.

Is there a best way to program the restrictions? I have tried different ways of programming to achieve but failing. When I have a phone programmed to do only local calls along with toll free, the phone is still able to call long distance. Thanks.

abrink 07-20-2018 05:17 PM

Please disregard, I have figured out to do this.
After putting the short codes for all toll free numbers, my last entry was 91XXXXXXXXXX - Barred and the long distance call was blocked.
This is all programming done on the user level. If you have one that maybe easier, I would like to know. Thanks.


All times are GMT -7. The time now is 01:33 AM.