problems with the implementation of wake on lan to use different vlan
 

get to the point, I was asked to implement a switch core WoL avaya 5510 working with a stack of 7 avaya 4548 switch. My problem is being generated when in attempt to use Wol from a vlan to another vlan 99 may be the vlan 213 250 216 .... etc

does not work, you can not turn on the pc, but if I put him to an address in the same vlan, for example if both pc are ela vlan 99 where did turn on the pc

I found a suggestion of Avaya, which is about creating fordwading for udp packets, but it did not work

As this particular forum is not set up for technical assistance, I can direct you on how to register for support via the Avaya Support Website. Create a logon ID today by navigating to the Avaya Support Website https://support.avaya.com – click on REGISTER NOW

Once registered you can utilize the site to create a Service Request for support.