Avaya Support Forums

Avaya Support Forums (http://support.avaya.com/forums/index.php)
-   Avaya Aura & Unified Communications (http://support.avaya.com/forums/forumdisplay.php?f=2)
-   -   AAC 8.0 SIP trunk to SM (http://support.avaya.com/forums/showthread.php?t=13262)

lazar26 01-22-2018 11:42 PM

AAC 8.0 SIP trunk to SM
 
Hello,

we've installed an Aura (7.0.1) integrated bare metal Avaya AAC8.0, a TLS SIP trunk between SM and AAC was created. An initial configuration of AAC was completed, a meet-me conference service URI was created. We're using a CM switch with a bunch of H.323 phones (1603/1616) and the problem is when we dial to the AAC conference number from extension on CM no matter what we try it keeps saying 407 Proxy auth required. AAR routing call type is set to unku, calls to meet-me on AAC are routed through a separate non-IMS trunk to SM and further to AAC from there. Tried different settings on either trunks, still can't get it working, am I missing something trivial? Had no time to complete AAC course, had to investigate everything on-the-fly, so perhaps there is something conceptual that I'm not still into? Any help is greatly appreciated!

kumar1499 01-23-2018 07:41 AM

Any trusted IP or entity link may not challenge with proxy authentication. you need to check if there is a option in AAC to add this link as trusted

lazar26 01-25-2018 12:38 AM

Hello, thx for your reply.

SIP trunks are configured in strict correspondence with the https://downloads.avaya.com/css/P8/documents/101022915 document. I've additionally checked the properties of Element Manager -> Avaya Aura Core -> Session Manager and the checkbox Trusted is set. The connection policy field in SMGR -> Routing -> SIP Entity -> Conferencing is set to trusted also. Any other ideas? Thank You!


All times are GMT -7. The time now is 01:30 AM.