Avaya Support Forums

Avaya Support Forums (http://support.avaya.com/forums/index.php)
-   IP Telephony and Convergence (http://support.avaya.com/forums/forumdisplay.php?f=8)
-   -   Unanswered calls keep on ringing (http://support.avaya.com/forums/showthread.php?t=4475)

anjum1 04-09-2014 12:16 AM

Unanswered calls keep on ringing
 
1 Attachment(s)
Hi,

I'm facing this problem with Avaya Aura CM 6.2. When someone call from PSTN to CO lines call get routed to operator, operator answer the call and transfer to any station. If nobody pickup from the station and calling party hangup the call keep on ringing on the station. Seems like Avaya CM don't understand the disconnect sent by telco. Trunk group settings are loop start and bellcore. Following is the call flow and system setup, please help.

PSTN > CO Lines (MM711) > CM 6.2 > Station

G450 S8300 MM711

Attached are the configs regarding cadence settings I made but it didn't solve the problem, i'm wondering if these configs are correct.

rbrookes 04-10-2014 03:53 AM

You might want to try "ground start", if that is an easy thing for you to switch to. Good explanation of benefits of loop start and ground start here: http://pbxbook.com/other/trunks.html#Call%20Disconnect


All times are GMT -7. The time now is 05:18 AM.