Avaya Support Forums

Avaya Support Forums (http://support.avaya.com/forums/index.php)
-   Avaya Aura & Unified Communications (http://support.avaya.com/forums/forumdisplay.php?f=2)
-   -   Branch Session Manager link to LSP down (avaya-lsp-fs) (http://support.avaya.com/forums/showthread.php?t=11020)

iantro 02-26-2016 01:37 PM

Branch Session Manager link to LSP down (avaya-lsp-fs)
 
1 Attachment(s)
Hello!
I try to configure LSP (CM,BSM and utility server) like description ont Avaya Documents.
H.323 phones ang G430 gateway work good (re registration on the LSP CM, if I disconnect server with main CM).
But BSM do not connecte to LSP CM.
Session Manager Entity Link Connection status show "avaya-lsp-fs" DOWN - "500 Server internal error, Destination Unreachible".
In the traceSM I see OPTION message from BSM to LSP CM and no any response.
What I try to configure BSM link:
Make BSM SIP entity.
In the SM->Branch session manager, add BSM.
Add Entity link from BSM to Main CM
I attach screenshots
Thanks!

iantro 03-02-2016 10:50 PM

new problem
 
Hello.
I read documentation and see:
I must add BSM to nodes-name
But I do not found where it is use (signaling-group).
Now I add signaling-group 2, where I use BSM as the far end.
I change signaling group in the SIP trunk, from1 to 2 only in the LSP CM.
And it is work.
But if I use save translation all command, I get old situation.
Where and how I must use BSM node-name?
Thanks!

rajan46 06-01-2019 03:02 AM

BSM node-name need not be added on CM. Main SM's IP address will be automatically replaced with BSM asset IP when LSP/ BSM is active.


All times are GMT -7. The time now is 10:43 AM.