Avaya Support Forums

Avaya Support Forums (http://support.avaya.com/forums/index.php)
-   Contact Center Applications (http://support.avaya.com/forums/forumdisplay.php?f=3)
-   -   Outbound call-H323 port selection type either round robin or least idle port in AAEP (http://support.avaya.com/forums/showthread.php?t=11178)

mamb 03-23-2016 09:10 AM

Outbound call-H323 port selection type either round robin or least idle port in AAEP
 
Hello All,

Environment:
1. AAEP 6.x
2. OD-Application used for outbound call
3. 40 H323 ports configured in EPM-web-interface

Assume the 40 H323 ports configured for the OD-Application of call type as outbound.
The LaunchCCXML method used to initiate the outbound call.

1. How the H323 port being selected for outbound calls in MPP. either by round robin or circle type or to select the least idle port.
2. Is there a way to configure the port selection type in EPM-web-interface from least idle to circle/round robin.

Thanks & Regards

mamb 04-05-2016 08:50 AM

Outbound call-H323 port selection type either round robin or least idle port in AAEP
 
Hello All,
The H323 port selection is based on & always from ascending. for e.g.

H323-port-1 --> having call-1
H323-port-2 --> having call-2
H323-port-3 --> free port
H323-port-1 --> call-1 is completed. call-3 enters
H323-port-1 --> having call-3

Thanks.


All times are GMT -7. The time now is 12:53 AM.