Avaya Support Forums

Avaya Support Forums (http://support.avaya.com/forums/index.php)
-   Contact Center Applications (http://support.avaya.com/forums/forumdisplay.php?f=3)
-   -   AACC After Call Break (http://support.avaya.com/forums/showthread.php?t=5013)

jslabot 08-22-2014 12:54 PM

AACC After Call Break
 
AACC 6.3 SP10/CS1000 AML/1140E end points

We have a business unit that would like to configure agents to use the After Call, Break for N Seconds function in the Call Presentation Class. However, they would like the agents to be able to end the break early if they don't need the full allotted time to complete their call documentation.

The only way I've found to do it is to go Not Ready and then back to Ready. This approach doesn't work for the business unit because it screws up their adherence reporting.

Is there another way for the agent to manually end the forced break and become available?

lsngta 08-23-2014 12:48 AM

Hi,,

Just a thought....If the agents are instructed to login in "manual-in" mode ,the system puts them into "aftercallwork" automatically.If at all the agent finishes the acw sooner than expected they can press the manual-in button on their phones and they gonna be back available for acd calls.
on the other hand if the agent logins in "auto-in" mode,they will never go to acw mode unless they press the acw button after the acd call or needs programming done in the CM to fix certain acw time for their agents to make the acw appear automatically( after finishing an acd call in auto-in mode)

marzahn 08-25-2014 11:09 AM

After call work time is set in Skill (hunt group) configuration on tab 2. I set ours to anywhere between 45 to 180 seconds depending on the manager's order.

An agent can select after call work during the which allows the agent to determine his or her time out. However they have to press "auto-in" to recieve calls again.


All times are GMT -7. The time now is 09:01 PM.