Avaya Support Forums

Avaya Support Forums (http://support.avaya.com/forums/index.php)
-   IP Telephony and Convergence (http://support.avaya.com/forums/forumdisplay.php?f=8)
-   -   ASBCE- URI Groups to divide incoming traffic to differents IPO's (http://support.avaya.com/forums/showthread.php?t=14114)

jimen28 10-08-2019 05:19 PM

ASBCE- URI Groups to divide incoming traffic to differents IPO's
 
Hi everyone! I'm working with an ASBCE, we have two IPO's 500v2. SiteA is connected with A1 and SiteB with A2 interfaces in SBC, they are confgured to dial to Third SIP Server with SIP Trunk in B1

All outgoing traffic is working but I don't know how to divide the incoming traffic in B1, I read that I need to create two URI Group and Routing Profiles but all of my tests are unsuccessful. All traffic is going to the site A

If someone has a configuration example or something to guide me I'd very grateful

mlombardi1 10-10-2019 12:42 PM

Create one routing profile called something like "To IPO" with two entries, rank 1 and rank 2. Rank 1 is assigned a URI group matching incoming calls destined for site A. Rank 2 has no URI group assigned and it used as a default catch-all. Any incoming traffic not matching rank 1 will route per rank 2 and flow to site B.

It's important the URI group criteria matches ALL traffic for site A, for example by DID range. I have best luck with URI groups using regular expressions.

Hope this clears things up for you.


All times are GMT -7. The time now is 05:41 AM.