Avaya Support Forums

Avaya Support Forums (http://support.avaya.com/forums/index.php)
-   Avaya Aura & Unified Communications (http://support.avaya.com/forums/forumdisplay.php?f=2)
-   -   Avaya G450 Boot Bank (http://support.avaya.com/forums/showthread.php?t=14197)

brookj 01-29-2020 11:07 AM

Avaya G450 Boot Bank
 
1 Attachment(s)
When I do a show image version on my G430 it shows:

Bank Version
------ ----------
A N/A
B (current) 39.12.0

How do I get bank A active?

mlombardi1 01-29-2020 11:52 AM

Bank A is corrupt or empty. There are two boot banks to allow for quick rollback in case a firmware upgrade causes problems. Only one valid firmware image is needed for the media gateway to function.

Upload a firmware image to a file server and use the "copy scp SW_imageA" command to download it. You can also load firmware locally off a USB drive. Use "copy usb" in that case.

The "set boot bank bank-a" command will mark Bank A as the primary boot bank. This takes effect after reboot.


All times are GMT -7. The time now is 09:59 AM.