Avaya Support Forums

Avaya Support Forums (http://support.avaya.com/forums/index.php)
-   IP Telephony and Convergence (http://support.avaya.com/forums/forumdisplay.php?f=8)
-   -   Problem with upgrade bcm400 to bcm450 r 6 (http://support.avaya.com/forums/showthread.php?t=493)

vparedes 11-29-2010 02:35 PM

Problem with upgrade bcm400 to bcm450 r 6
 
BCM U-Boot 1.2.1 (Jul 24 2008 - 11:05:06)

CPU: 8567_E, Version: 1.1, (0x807d0111)
Core: E500, Version: 2.2, (0x80210022)
Clock Configuration:
CPU:1333 MHz, CCB: 533 MHz,
DDR: 266 MHz, LBC: 33 MHz
QE: 533 MHz
L1: D-cache 32 kB enabled
I-cache 32 kB enabled
Board: BMB450 R1.0
I2C: ready
DRAM: Initializing
DDR: 512 MB
POST: running... POST memory PASSED
L2 cache 512KB: enabled
RTC Clock needs to be set!!!
Error: start and/or end address not on sector boundary
Error: start and/or end address not on sector boundary
Error: start and/or end address not on sector boundary
Error: start and/or end address not on sector boundary
Error: start and/or end address not on sector boundary
Error: start and/or end address not on sector boundary
Error: start and/or end address not on sector boundary
Error: start and/or end address not on sector boundary
Error: start and/or end address not on sector boundary
Error: start and/or end address not on sector boundary
Error: start and/or end address not on sector boundary
Error: start and/or end address not on sector boundary
Error: start and/or end address not on sector boundary
Error: start and/or end address not on sector boundary
Error: start and/or end address not on sector boundary
Error: start and/or end address not on sector boundary
Error: start and/or end address not on sector boundary
Error: start and/or end address not on sector boundary
Error: start and/or end address not on sector boundary
Error: start and/or end address not on sector boundary
Error: start and/or end address not on sector boundary
Error: start and/or end address not on sector boundary
Error: start and/or end address not on sector boundary
Error: start and/or end address not on sector boundary
Error: start and/or end address not on sector boundary
Error: start and/or end address not on sector boundary
Error: start and/or end address not on sector bounda

nirmalsi 01-06-2011 06:54 AM

Problem with upgrade bcm400 to bcm450 r 6
 
I have seen this error in past. These could be happening:
-source BCM not patched latest
-BFT connections is loose(try re fitting BFT)
-BFT is bad and needs RMA


All times are GMT -7. The time now is 10:38 PM.