Avaya Support Forums

Avaya Support Forums (http://support.avaya.com/forums/index.php)
-   Avaya Networking Products (http://support.avaya.com/forums/forumdisplay.php?f=25)
-   -   log message and snmp trap identification (http://support.avaya.com/forums/showthread.php?t=12068)

kradwa 10-12-2016 12:13 PM

log message and snmp trap identification
 
Does anyone know how or where to identify the following messages from a stack of 5 - 4850s ?

- SMGR:Ring: B 1/1 - D 2/2 - D 3/3 - D 4/4 - D 5/5
- bsnStackManagerReconfiguration
- SMGR:BAY_SEC failed DB-exchange, stack formation delayed
- SNMP:Trap: newRoot
- SNMP:Trap: entConfigChange

- SMGR:MODULE_INACTIVE event sent, unit mask 0x04, appl mask 0xBFFF7FFF
- SMGR:DISTRIBUTE_DB event sent, unit mask 0x01, appl mask 0x00000000
- SMGR:Remove event sent, unit mask 0x01, appl mask 0x00000000 0x00017FFF
- SMGR:Leave event sent, unit mask 0x01, appl mask 0x001BFFFD 0xBFFF7FFF

zakabog 10-14-2016 09:52 AM

From this doc https://downloads.avaya.com/css/P8/documents/100134575

Quote:

MODULE_INACTIVE event sent unit mask value appl mask value
A unit has left the stack. The 'unit mask' is a bit mask representation of the unit that left the stack.
Source Severity
Stack Manager Information
Remedial action
Make sure that the unit removal is intended.
Looks like it's unit #4 (0x04)

kradwa 10-14-2016 10:38 AM

Thank you very much.


All times are GMT -7. The time now is 06:06 PM.