Avaya Support Forums

Avaya Support Forums (http://support.avaya.com/forums/index.php)
-   Small and Medium Business Communications (http://support.avaya.com/forums/forumdisplay.php?f=6)
-   -   NOrtel 8003 Analog MWL (http://support.avaya.com/forums/showthread.php?t=400)

mongo5150 10-04-2010 01:48 PM

NOrtel 8003 Analog MWL
 
I have a school that we are proposing an IPO with 150 analog sets on a CS1000.

They would like to reuse the analog sets, IF we can lite the MWL. Is there a setting for the Nortel phones for the MWL?

I am waiting for a refurb 8003 to test with, but that is 2 days away, so if anyone can answer sooner.....

Thanks in advance.

pdgavin 10-11-2010 08:08 AM

There is no Nortel setting, however I am sure Nortel must have used a standard method to light the lights. Here are the choices you have in the analog extension section of Manager:


Message Waiting Lamp Indication Type: Default = None
Allows the selection of the message waiting indication (MWI) mode for analog and IP DECT extensions. For control unit and Phone V1 module analog extensions, the options None, On, 51V Stepped, 81V, Line Reversal A and Line Reversal B are available. For Phone V2 external module extensions and IP500 Phone base cards, the additional option 101V is available. On defaults the message waiting indication as follows using the system locale.
Locale
'On' =
Argentina, Australia, Brazil, Canada, Chile, China, Colombia, Japan, Korea, Mexico, New Zealand, Peru, Russia, Saudi Arabia, South Africa, Spain, United States, Venezuela.
51V Stepped
Belgium, Denmark, Finland, France, Germany, Greece, Hong Kong, Hungary, Iceland, Italy, India, Netherlands, Norway, Poland, Portugal, Singapore, Sweden, Switzerland, Taiwan, Turkey, United Kingdom.
On = 101V on Phone V2 modules and IP500 Phone cards, otherwise 81V.

Hopefully one of these options will work for you.


All times are GMT -7. The time now is 05:44 AM.