Avaya Support Forums

Avaya Support Forums (http://support.avaya.com/forums/index.php)
-   Avaya Networking Products (http://support.avaya.com/forums/forumdisplay.php?f=25)
-   -   4548gt-pwr no respond (http://support.avaya.com/forums/showthread.php?t=5699)

avila32 12-02-2014 12:56 PM

4548gt-pwr no respond
 
the Switch does not display anything when I connect via serial

fwilkepcs 12-04-2014 12:57 PM

Did you control serial communication settings on you computer? Have a look at 4500 series quick setup guide.

After connecting you computer to the switch hit STRG+Y

bkrishnaswam 12-18-2014 02:04 AM

It is also worth to check if the Serial console is enabled on the switch. If you are able to Telnet to the switch.

command from the Global configuration mode

#serial-console <unit 1-8> enable

Also check the serial connection settings as suggested by fwilkepcs.

dmertz 02-09-2015 11:54 AM

What kind of terminal emulation software are you using?

- PuTTy?
- Hyperterminal?
- Teraterm?

zakabog 02-10-2015 12:59 PM

Is this during boot up? If the switch is already up just press Ctrl + Y to bring up the CLI.


All times are GMT -7. The time now is 06:44 AM.