Avaya Support Forums

Avaya Support Forums (http://support.avaya.com/forums/index.php)
-   Contact Center Applications (http://support.avaya.com/forums/forumdisplay.php?f=3)
-   -   Voice Portal / Dialog Designer - no recording, when barge-in-type changed to hotword (http://support.avaya.com/forums/showthread.php?t=406)

frischke 10-07-2010 06:26 AM

Voice Portal / Dialog Designer - no recording, when barge-in-type changed to hotword
 
Hi,

in an Dialog Designer Application, we changed the barge-in-type from "speech" to "hotword".

Before that, in the "Call Details" we could download the wave-Files, in which was recorded, what the customer was saying.

After changing, there is no link to the recording anymore. In the Application Parameters is set up that "Speech and Data" will be recorded.

Hope, you can help.

robert2 10-19-2010 12:49 AM

Hi Branko,

It is working as designed. When hotword is used, the system will not store the callers speech.
The system is designed to not save the speech because when hotword is enabled the application is listening the entire time the application is running. So it would be storing speech data from the moment the call begins until it ends, no matter if the caller is speaking or not. This would quickly use up the MPP resources, and would create wav files so large it would fill the disk.

Regards,

Andras Robert
IVR and Voice Portal Backbone Engineer | GSD
Backbone Application | Avaya |
Address: Váci út 1-3, B-torony | H-1062 Budapest | Hungary|
Tel/Fax: +36 1 238 8358 | Mobile: +36 30 201 5777 |
Email: robert2@avaya.com |
Working hours: 7:00AM-4:00PM CET


All times are GMT -7. The time now is 08:32 PM.