Avaya Support Forums

Avaya Support Forums (http://support.avaya.com/forums/index.php)
-   Small and Medium Business Communications (http://support.avaya.com/forums/forumdisplay.php?f=6)
-   -   IPO Server Edition Expansion upgrade using Manager Program (http://support.avaya.com/forums/showthread.php?t=11734)

ghall1 06-30-2016 10:48 AM

IPO Server Edition Expansion upgrade using Manager Program
 
Hello,

I have an existing IPO Server Edition solution installed and I need to upgrade 2 x IP500v2 expansion's. I know that I can upgrade them both by using the Web Manager and even schedule them for out of hours, but the 2 sites in question poor quality data links back to the Primary Server.
I have tried using the Manager Upgrade Wizard and the upgrade fails.
The expansions are on version 9.1.4 and I'm upgrading to 9.1.7
Any suggestions:confused:

TIA

kirchenlo 07-06-2016 04:01 AM

Hallo,

as far as I understood, you need to check „Program Code” in the security settings.
Security Settings\ System \ Unsecured Interfaces

After checking the “Program Code” option you should be able to use Manager to upgrade the IP500v2 Expansion Unit.

Regards

ghall1 07-06-2016 05:54 AM

Quote:

Originally Posted by kirchenlo (Post 27712)
Hallo,

as far as I understood, you need to check „Program Code” in the security settings.
Security Settings\ System \ Unsecured Interfaces

After checking the “Program Code” option you should be able to use Manager to upgrade the IP500v2 Expansion Unit.

Regards

Hi kirchenlo,

Thanks for your reply.

Yes I also got that info from another forum and tried that and then did the upgrade but it still failed.
I can't find anything documented and was hoping some of the Avaya guys who used to give replies on here would respond.

rdagur 07-07-2016 01:19 AM

hi you can try upg after "reset security settings".:)

if failed than first reset and re create SYSTEM SD card via manager using sd card reader.
than try upg process.


All times are GMT -7. The time now is 04:22 PM.