Avaya Support Forums

Avaya Support Forums (http://support.avaya.com/forums/index.php)
-   Avaya Networking Products (http://support.avaya.com/forums/forumdisplay.php?f=25)
-   -   Avaya Ignition Server SNMP mib (http://support.avaya.com/forums/showthread.php?t=5098)

bdholmes 09-11-2014 08:52 AM

Avaya Ignition Server SNMP mib
 
In the 9.0.1 docs it states the following in the SNMP section:

"System load information is shown in the laLoad objects. These objects indicate the load
on the Ignition Server, expressed using the load average convention."

This appears to be a proprietary MIB. How can I obtain the details on this to load it up on our monitoring platforms?

Thanks in advance.

rshaynes 10-03-2014 09:44 AM

System Load Information via UCD laLoad
 
1 Attachment(s)
Per the Ignition Server documentation,

"The Ignition Server SNMP service supports SNMPv2C. The objects supported by the service come from the following SNMP MIBs: the MIB-2 MIB, the ucdavis MIB, and the HOSTRESOURCES-MIB."

In this case, the laLoad system load information is under the UCDAVIS (UCD) MIB.

Performing a SNMPWALK using, for example NET-SNMP, will yield this output.

Ex.

snmpwalk -v 2c -c community 192.168.1.5 ucd

For your network monitoring utility, loading or using the standard UCD-SNMP-MIB tree will be necessary.

A copy of UCD-SNMP-MIB from NET-SNMP is attached.


All times are GMT -7. The time now is 04:24 AM.