Avaya Support Forums

Avaya Support Forums (http://support.avaya.com/forums/index.php)
-   Avaya Aura & Unified Communications (http://support.avaya.com/forums/forumdisplay.php?f=2)
-   -   Installing CM template (http://support.avaya.com/forums/showthread.php?t=1602)

agdemers 03-30-2012 05:09 AM

Installing CM template
 
I would really appreciate some help with this... Relatively new to working with the CM, installed duplex template using system platform. Problem is I am unable to make any provisioning changes via SAT or native configuration manager. I can display parameters but not "add" or "change" anything, i.e. any parameter I input after change is deemed invalid.

I pointed the CM to the default weblm license server and created authorization files for both servers. I'm using a new CM user with administrative privileges and still nothing. HA is enabled and running. Any ideas?

agdemers 04-02-2012 01:21 PM

The solution in case anyone is interested: using SAT, enter the following commands: "save trans all" and "reset system 4".

sumit007 05-21-2015 05:02 AM

probably you dont have the rights

yadav29 05-21-2015 05:14 AM

I think you are not using with Administrator Privilege.
on SAT Command run the Command " Status login". it will show you which profile you are using.
prof 2, prof 18 has a higher privilege than the Other.


All times are GMT -7. The time now is 10:39 PM.