Avaya Support Forums

Avaya Support Forums (http://support.avaya.com/forums/index.php)
-   Avaya Aura & Unified Communications (http://support.avaya.com/forums/forumdisplay.php?f=2)
-   -   1 Problem 6 and 7 SRs (http://support.avaya.com/forums/showthread.php?t=5918)

pcarri 01-16-2015 10:25 AM

1 Problem 6 and 7 SRs
 
I have had problems with analog lines dropping from a g450. We've replaced phones, re-run cable, etc. Contacted Avaya Support and they've updated firmware on all analog cards (MM716AP) on our two g450's. Fast-forward a month, now the second g450 is showing alarms on 2 analog cards and analog lines are still dropping on the first g450. I've had to request help on this one issue multiple times because the SR keeps getting closed before the problems are resolved.

I've had trouble getting the problems addressed in single SR's, so I've resorted to 2 separate SR's to track the now disparate issues.

A technician is now being dispatched for the g450 that has been dropping the analog lines. We're going to reboot the other g450 that is showing alarms (they've been re-inserted by the previous Avaya technician and again by myself as requested from Avaya support staff).

I'd really like the engineer that is coming onsite to look at both devices, but they're covered in separate SR's. Is there a way to do that? The engineer is scheduled for Monday and it's a Friday and the reboot on the second gw won't happen until morning to see if they alarms will go away.

Totally new to the forums, I did do a bit of searching to see if I could find anything related. Might even be posting in the wrong area. If so, just let me know and I'll post elsewhere. Advice is appreciated.

mlombardi1 01-19-2015 08:17 AM

Sorry to hear this. Have you tried a management escalation via the web? A duty manager is supposed to call you within the hour after escalation. Make sure you get an MEA number from them to track the escalation.

pcarri 01-20-2015 09:54 AM

An onsite engineer arrived yesterday to address the original "analog line disconnecting" issue. Yesterday the other SR addressing the 2 analog cards with red flashing lights was supposed to be assigned to an engineer, he actually ordered 4, so I think he'll be able to take care of both. I'll wait today to see if he gets the SR or can resolve the issue and escalate it this afternoon if necessary.

Thank you for the advice


All times are GMT -7. The time now is 08:19 AM.