View Single Post
  #1  
Old 11-02-2011, 09:52 PM
nmabao nmabao is offline
Aspiring Member
.
 
Join Date: Nov 2011
Posts: 2
nmabao has 10 reputation points
Default IPSI TN2312BP Out-of-service

Dear all,

I got a problem with IPSI Card on G650 Media Gateway.
The status of IPSI card on CM:
list ipserver-interface

IP SERVER INTERFACE INFORMATION

Port Pri/ Primary/ Primary/ Primary/ State Of
Ntwk Sec Secondary Secondary Secondary Serv Control Health
Num Bd Loc IP Address Host Name DHCP ID State State C P E G
---- ------ --------------- ---------------- --------- ----- ------- -------
1 1A01 172.16.40.240 172.16.40.240 ipsi-A01a OUT active 0.1.1.0


Pingall from CM:
init@cm> pingall -i
Testing..

HostName IPAddress Status
ipsi-A01a 172.16.40.240 Pass


Display system-parameters ipserver-interface:
display system-parameters ipserver-interface
IP SERVER INTERFACE (IPSI) SYSTEM PARAMETERS

SERVER INFORMATION


Primary Control Subnet Address:
Secondary Control Subnet Address:

OPTIONS

Switch Identifier: A
IPSI Control of Port Networks: enabled
A-side IPSI Preference: enabled
IPSI Socket Sanity Timeout: 15

QoS PARAMETERS
802.1p: 6
DiffServ: 46

Display cabinet:
display cabinet 1
CABINET
CABINET DESCRIPTION
Cabinet: 1
Cabinet Layout: G650-rack-mount-stack
Cabinet Type: expansion-portnetwork


Location: 1 IP Network Region: 1

Rack: Room: Floor: Building:

CARRIER DESCRIPTION
Carrier Carrier Type Number

E not-used PN 01
D not-used PN 01
C not-used PN 01
B not-used PN 01
A G650-port PN 01



Display ipserver-interface:
display ipserver-interface 1
IP SERVER INTERFACE (IPSI) ADMINISTRATION - PORT NETWORK 1

IP Control? y Ignore Connectivity in Server Arbitration? n
Encryption? y

PRIMARY IPSI QoS AND ETHERNET SETTINGS
Location: 1A01 Use System Level Parameter Values? y
Subnet Mask: /24 802.1p: 6
IP Address: 172.16.40.240 DiffServ: 46
Gateway: 172.16.40.1 Auto? y



I also google this issue but didn't get any solution please help me resolve it
Thank you very much.
Reply With Quote