View Single Post
  #6  
Old 11-22-2013, 02:56 AM
stehule stehule is offline
Member
 
Join Date: Apr 2010
Posts: 9
stehule has 10 reputation points
Default

Hallo,
We have already un-tick the box = Impedance Match is setting to Manual (Off). It is not a solution. Problem after rebooting or unplugged/plugged analog extension into analog trunk is still the same.

SSA after reboot the IP Office 500V2 can not show satus analog trunk, because SSA is not connect yet, when trunk is seized.

SSA after connect analog extension to the analog line, show only change status: Out of Service/Idle. Do not show any seized trunk.

Any other device is not connect into the analog trunk (only analog extension from the same IP Office 500V2).

Sorry for my english, do you understand me?

Thanks,
Petr
Reply With Quote