Thread: DHCP Question
View Single Post
  #4  
Old 05-22-2013, 04:22 PM
rvengco rvengco is offline
Whiz
.
 
Join Date: Jul 2010
Posts: 35
rvengco has 10 reputation points
Default

You can setup a multi-location dialing. First check if Multiple locations license is enable from your display system-parameters customer-options
In a Multi-location, you can configure your IP phones to have their own location. They are getting it from the network-region where they are in.then you can configure your ARS or AAR analysis to route your calls per location
for example:
You need to add/configure location x from your change locations then "change ars analysis 9 location x", you can configure your routing on that setting and you can route there whichever trunk group you wanted, you might want to route your call to the trunk group connected to the mediagateway where you want the call to be routed to. If your IP phone is in location X it will use the ARS analysis based on the configuration or routing you did earlier.
Reply With Quote