You can download the latest 46xxsettings.txt file from:
http://support.avaya.com/css/appmana...72125345#files
IMPORTANT: There are TWO 46xxsettings.txt files for these products. Make sure you download and use the correct file for your product and release.
This link is to the file directly for
- 96x1 telephone H.323 software release 6.2
- 96x1 telephone SIP software release 6.0 SP3
- 96x0 telephone H.323 software release 3.1 SP4
- 96x0 telephone SIP software release 2.6 SP7
- 46xx telephone H.323 software release 2.9 SP2
- 46xx telephone SIP software release 2.2.2
- 364x telephone SIP software release 1.0
- 3631 telephone H.323 software release 1.3.0
- 16xx telephone H.323 software release 1.3
- 16CC telephone SIP software release 1.0
- 1603 telephone SIP software release 1.0
- 1692 telephone H.323 software release 1.4
- Softphone SIP software release 2.1
ftp://ftp.avaya.com/incoming/Up1cku9...xxsettings.txt
Below is a brief list of the VPN settings extracted from the 46xxsettings.txt file.
####################### VPN SETTINGS #########################
##
## SET NVVPNMODE 1
## SET DHCPSRVR 192.168.16.2
## SET NVVPNCFGPROF 0
## SET NVIKECONFIGMODE 1
## SET NVIKEXCHGMODE 1
## SET NVIKEXCHGMODE 2
## SET NVIKECONFIGMODE 1
## SET NVVPNAUTHTYPE 3
## SET NVSGIP "10.1.1.1"
## SET NVVPNUSER %MACADDR%
## SET NVVPNPSWDTYPE 1
## SET NVVPNCOPYTOS 2
## SET NVVPNENCAPS 0
## SET NVIKEPSK "abc1234"
## SET NVIKEID "VPNPHONE"
## SET NVIKEIDTYPE 3
## SET NVIPSECSUBNET "0.0.0.0/0"
## SET NVIKEDHGRP 2
## SET NVPFSDHGRP 0
## SET NVIKEP1ENCALG 0
## SET NVIKEP2ENCALG 0
## SET NVIKEP1AUTHALG 0
## SET NVIKEP2AUTHALG 0
## SET NORTELAUTH 1
## SET NVXAUTH 1
## SET RINGPRIORITY 3
## SET VPNPROC 1
## SET ALWCLRNOTIFY 0
## SET DROPCLEAR 1
## SET NVMCIPADD "0.0.0.0"
## SET NVHTTPSRVR "0.0.0.0"
## SET NVTLSSRVR "0.0.0.0"
## SET NVIKEOVERTCP 0
## SET NVIKEP2LIFESEC 432000
## SET NVVPNPSWD ""
## SET NVVPNSVENDOR 4
## SET NVVPNUSERTYPE 1
## SET VPNTTS 0
Telephones will attempt to establish a VPN connection only if the system parameter NVVPNMODE is set to "1" (Enabled). You can choose to permit your end users to change this value if a remote telephone will also be used within the enterprise environment. By enabling the NVVPNMODE, you will be able to configure the parameters of the VPN right on the phone itself (for testing purpose).
Arbi