View Single Post
  #1  
Old 09-16-2013, 09:33 AM
eyerh66 eyerh66 is offline
Hot Shot
 
Join Date: Nov 2011
Posts: 19
eyerh66 has 10 reputation points
Default Incoming DID Routing Question

Our incoming/outgoing local phone traffic is currently on a dynamic T1. Unfortunately, when our internet service goes out as it has a few times in the last month, our traffic is greatly affected as well. We do have a back-up router that will continue to carry some traffic but the bandwidth is minimal.

We also have a PRI T1 for our fax traffic through the same vendor. Our solution is to have a few of our Public Safety DID numbers ported from the dynamic T1 to the PRI T1 so when we do have an internet outage, the Public Safety DID numbers will not be affected.

My question is: Since the routing of the DID numbers will happen on the vendor side, is there anything I have to do internally in the PBX?
Reply With Quote