View Single Post
  #1  
Old 10-04-2013, 01:18 AM
btaran btaran is offline
Member
 
Join Date: Sep 2011
Posts: 8
btaran has 10 reputation points
Default Numbering plan identification on Called party number, IPO 500

Hello.

I have IPO 500v2, 7.0(36) with E1 pri.
I need to set Numbering plan identification (in Called party number) to ISDN/telephony numbering plan (Recommendation E.164). How i can do it?

In Calling party number it's checkbox "Force Number Plan to ISDN"

Trace:
Code:
10/09/13  12:03:44  Trace DSS1 (Q.931) created by Linkbit AT1000 7.31.61006
 *********************  Rx1  TS 01  CALL  CR=  3  2155000->2132264  12:40:57-12:41:16
12:40:57.395           Rx1         SETUP                 (2155000->2132264)
   00 01 12 1C 08 02 00 03 05 04 03 80 90 A3 6C 09 21 80 32 31 35 35 30 30 30 70 08 80 32 31 33 32
   32 36 34 A1
   LAYER 2
   DSS1
       04  08 00001000 Protocol discriminator.......... Recommendation Q.931/I.451 user-network call control messages (8)
     -- Call reference
     -- Message type
     -- Bearer capability
     -- Calling party number
       14  6C 01101100 Information Element Identifier.. Calling party number IEI (108)
       15  09 00001001 Length indicator................ 9
       16  21 0....... Extension indicator............. 0 (information continues in the next octet)
              .010.... Type of number.................. 2 (National number type)
              ....0001 Numbering plan identification... 1 (ISDN/telephony numbering plan)
       17  80 1....... Extension indicator 2........... 1 (last octet)
              .00..... Presentation indicator.......... 0 (Presentation allowed)
              ...000.. spare........................... 0
              ......00 Screening indicator............. 0 (User-provided not screened)
      [18-24] -------- Number digits................... 7 Chars: "2155000"
     -- Called party number
       25  70 01110000 Information Element Identifier.. Called party number IEI (112)
       26  08 00001000 Length indicator................ 8
       27  80 1....... Extension indicator............. 1 (last octet)
              .000.... Type of number.................. 0 (Unknown number type)
              ....0000 Numbering plan identification... 0 (Unknown)
      [28-34] -------- Number digits................... 7 Chars: "2132264"
     -- Sending complete
12:40:57.417    22 ms  Tx1  TS 01  CALL PROCEEDING     
12:40:57.517   100 ms  Tx1  TS 01  ALERTING            
12:41:05.981  8464 ms  Tx1  TS 01  CONNECT             
12:41:16.515 10534 ms  Tx1  TS 01  NOTIFY              
12:41:16.565    50 ms  Tx1  TS 01  DISCONNECT            (Cause=16 : Normal call clearing)
12:41:16.567     2 ms  Rx1  TS 01  RELEASE             
12:41:16.584    17 ms  Tx1  TS 01  RELEASE COMPLETE    
10/09/13  12:42:29  Trace stopped
ps. sorry for bad language.