View Single Post
  #1  
Old 02-12-2014, 07:07 PM
grojas81 grojas81 is offline
Aspiring Member
 
Join Date: Feb 2011
Posts: 2
grojas81 has 10 reputation points
Default Session Manager - Refer Message

Hi guys
Hope someone else have seen this before.
I have a CM 5.2.1 with agents connected using OneX agent, digital stations and IP stations, a SIP trunk connect to a session manager that connects to the PSTN using an SBC ACME Packet. A dialer genesys is being added to the session manager to place calls to the PSTN and when the call is connected and a real person is detected, a transfer is requested from the Genesys to the SM but the refer is not being forwarded to the SIP trunk in the PBX, it is being forwarded to the provider with answer with a notify 503 Service unavailable. Im attaching a doc file with a diagram solution and a diagram with the sip flow.
how can I make the session manager to reroute that refer to the sip trunk in the PBX?
Thanks in advance!
Attached Files
File Type: docx sm.docx (125.1 KB, 39 views)
Reply With Quote