View Single Post
Old 09-10-2015, 01:21 PM
brown456 brown456 is offline
Hot Shot
Join Date: Aug 2015
Posts: 10
brown456 has 11 reputation points
Default E.164 / E164 short code question - IP Office

Our SIP provider wants to send an outgoing call invite like this:


This works for us with this config, dialing a 7 and then a 1 and then the 10 digit number, our "Short Code" setup:

Code 7N;
Feature - Dial
Telephone Number - +N
Line Group ID - tied to our ARS Route ID

I'd like to set up the same thing by just dialing say a 6 and then the 10 digit number (the 1 would be passed without dialing it) as some of our users are used to not dialing a "1" for US dialing.

Suggestions on how to set up the Short Code and/or the ARS code to accomplish this? I tried a Short Code of 6N; and a Telephone Number of +1N but it ended up dropping the last two digits of the phone number when I viewed our Avaya Monitor INVITE statement. But I may need an ARS code to support this too, not sure.

Thanks in advance.

UPDATE ---- I got this to work, but would still like to hear input on if this is the best way to accomplish for this short code or the one working above.

Code - 6xxxxxxxxxx
Feature - Dial
Telephone Number - +1N
Same line group

Last edited by brown456; 09-10-2015 at 02:01 PM. Reason: Updated information
Reply With Quote