View Single Post
  #4  
Old 08-28-2014, 05:09 PM
thiel2 thiel2 is offline
Genius
 
Join Date: Apr 2013
Posts: 358
thiel2 has 50 to 99 reputation pointsthiel2 has 50 to 99 reputation pointsthiel2 has 50 to 99 reputation pointsthiel2 has 50 to 99 reputation points
Default

If you were to pull the configuration from your IP Office with Manager, you would be able to see if you are using SIP trunks or still using the PRI. A PRI handoff will be much easier for you to handle yourself, assuming that you have a PRI previously and the programming is in place. It's just a regular Cat-5 cable, or if a cross over is needed, it is pins 1&2 swapped with 4&5, NOT an Ethernet crossover(!). If the green light on the IPO doesn't come on with one type of cable, try the other. Different brands and even models within brands (looking at you, Adtran) require straight through or cross over. I just carry a little adapter made out of a patch cord and a jack as a crossover adapter, try the straight through first, and if no go, try it with the crossover.
Reply With Quote