View Single Post
  #3  
Old 05-07-2018, 01:37 AM
kumar1499 kumar1499 is offline
Whiz
 
Join Date: Oct 2017
Location: Bangalore, India
Posts: 40
kumar1499 has 11 reputation points
Default

It gives priority to name, can you try setting the below option to 3 in settings file


# DISPLAY_NAME_NUMBER specifies whether the name and/or number will be displayed for
## incoming calls, and if both are displayed, the order in which they are displayed.
## Value Operation
## 0: display calling party name only
## 1: display calling party name followed by calling party number
## 2: display calling party number only
## 3: display calling party number followed by calling party name
## This parameter is supported by: ## J169/J179 SIP R1.5.0; valid values 0 through 3; the default value is 0. ## 96x1 SIP R6.2 and later; valid values 0 through 3; the default value is 0.
## 96x1 SIP R6.0.x; valid values 0 through 1; the default value is 0.
## 96x0 SIP R2.6.5 and later; valid values 0 through 3; the default value is 0.
## 96x0 SIP R2.0 through R2.6.4; valid values 0 through 1; the default value is 0. ## SET DISPLAY_NAME_NUMBER 0
Reply With Quote