View Single Post
Old 06-05-2020, 12:41 PM
hanlo4 hanlo4 is offline
Join Date: May 2020
Location: Altoona, PA
Posts: 8
hanlo4 has 10 reputation points
Default UCM 11.1 issue after install

UCM 11.1 install fresh and when installing osboot fault is status in system status. Everything on the UCM looks normal (if using a montior and watching the install process. At boot I did run the ignition process and after that the system gets stuck at OS System Fault and will not start the applications in system status.

The card is inaccessible I have tried this with 2 different installations with a different USB flash drive. Also Different ucms and also different IP500 systems.

Not sure what the issue is or if this is a bug anyone else has ran into. Or any insite would be great thanks
Reply With Quote