View Single Post
  #1  
Old 02-23-2018, 08:46 AM
dwihl dwihl is offline
Aspiring Member
 
Join Date: Feb 2018
Posts: 2
dwihl has 10 reputation points
Default PC's not receiving DHCP IP via data port on Avaya Phone

I have this problem on all computers using an Avaya phone data port to connect to the LAN since we replaced an Extreme switch with a new Cisco Meraki switch

The phones receive an IP OK (192.168.30.x)

The PC's don't get a data IP (10.50.20.x) but work if we assign them a static IP on this range, also the PC's do get a DHCP IP if plugged directly in to the switch.


We use an Avaya S8300 and G430 (Our DHCP server) onsite.

The Topology is:

PC (Avaya One-X) 10.50.20.x -- Switch -- Riverbed -- Firewall -- Avaya G430 (192.168.30.3)

We had to setup a Layer 3 relay on the switch to the DHCP server because PC's were not picking up a DHCP address before hand (when plugged in to the switch directly).

We have logged this with Avaya support who said it is a Switch port issue but we have tried all configs we can up to now.


TAGS: Avaya, VOIP, S8300, G430, One-X, Relay, DHCP Meraki,Citrix,Extreme, Firewall, Riverbed
Reply With Quote