View Single Post
  #1  
Old 09-08-2010, 05:05 AM
cdresen cdresen is offline
Member
 
Join Date: May 2010
Posts: 3
cdresen has 10 reputation points
Default CM 5.2.1 / SES 5.2.1 - Using wrong Protocol to connected Proxy

Hi there!

We have a working solution with a CM 5.2.1 / SES 5.2.1 connected to a Ericsson MX-ONE PBX. The trunks between SES and Ericsson are configured as SIP-Trunks using TCP.

Our main problem right now is, that all connections from the SES to any other device work with TCP. But whenever a an INVITE is send from the SES to the Ericsson side, the whole communication is realized via UDP.

Unfortunately it is not possible, as far as I know, to disable UDP on either side.

Just to be clear, I'm talking about everything but the RTP-Sessions. Of course, they are supposed to be UDP and thats all fine.

What our customer just wants, is that all the communications, with the expection of the RTP-rounds, is TCP only.

I have uploaded snapshots of either configurations of both systems.

Please fill this thread with ideas/thoughts/comments. Every help is much appreciated!

Regards,
Chris
Attached Images
File Type: jpg SES-Host-Map-2010-09-07-02.jpg (33.8 KB, 18 views)
Attached Files
File Type: txt SIP Routen TSE Testsystem 2010-08-30.txt (2.6 KB, 13 views)
Reply With Quote