View Single Post
  #2  
Old 10-11-2010, 08:08 AM
pdgavin pdgavin is offline
Guru
.
 
Join Date: Aug 2010
Posts: 167
pdgavin has 10 reputation points
Default

There is no Nortel setting, however I am sure Nortel must have used a standard method to light the lights. Here are the choices you have in the analog extension section of Manager:


Message Waiting Lamp Indication Type: Default = None
Allows the selection of the message waiting indication (MWI) mode for analog and IP DECT extensions. For control unit and Phone V1 module analog extensions, the options None, On, 51V Stepped, 81V, Line Reversal A and Line Reversal B are available. For Phone V2 external module extensions and IP500 Phone base cards, the additional option 101V is available. On defaults the message waiting indication as follows using the system locale.
Locale
'On' =
Argentina, Australia, Brazil, Canada, Chile, China, Colombia, Japan, Korea, Mexico, New Zealand, Peru, Russia, Saudi Arabia, South Africa, Spain, United States, Venezuela.
51V Stepped
Belgium, Denmark, Finland, France, Germany, Greece, Hong Kong, Hungary, Iceland, Italy, India, Netherlands, Norway, Poland, Portugal, Singapore, Sweden, Switzerland, Taiwan, Turkey, United Kingdom.
On = 101V on Phone V2 modules and IP500 Phone cards, otherwise 81V.

Hopefully one of these options will work for you.
Reply With Quote