View Single Post
  #7  
Old 06-13-2011, 06:11 PM
rprinsloo rprinsloo is offline
Hot Shot
 
Join Date: Mar 2011
Posts: 11
rprinsloo has 10 reputation points
Default

Hi there,

Thank you to everyone who responded with advice. It is much appreciated.

We have resolved this problem as follows:

Add the semicolon after the N, set the "Dial Delay Count" to 0 and the "Dial Delay Time" to 4 so that it forces the system to use the Dial Delay Time.

The Avaya documentation defines the use of the semicolon as such:

; - Receive Sending Complete

When used this must be the last character in the short code string. If the Dial Delay Count is 0, a ; instructs the system to wait for the number to be fully dialed, using the Dial Delay Time or the user dialing #, before acting on the short code. If the Dial Delay Count is non-zero, the dialing is only evaluated when # is pressed.

So it was the semicolon along with setting the Dial Delay Count to 0 that forced the system to use the Dial Delay Time. Problem sloved. The user no longer has to press pound to dial the number via the SIP trunk.

Rudi
Reply With Quote