Thread: Upgrade WAP9132
View Single Post
  #1  
Old 05-25-2017, 09:44 AM
cook166 cook166 is offline
Aspiring Member
 
Join Date: May 2017
Posts: 1
cook166 has 10 reputation points
Default Upgrade WAP9132

Avaya WAP9132 WiFi AP
SCD Firmware: 5.00
Bootloader: 7.1.0
Radio Driver: 3.1.0
Software Version: 7.6.1

I'm trying to upgrade the software from 7.6.1 to 8.3.1. This AP is being managed by WOS. I have successfully upgraded dozens of other AP's in my environment with the exact same specs using the same file. I've tried upgrading via the WOS, CLI, and also logging into the Web utility of the AP directly. I have 3 AP's that will not update to this or any other version of software.

When I try to upgrade from the web interface of the AP directly:

When I set the active image to the new version it says the system software image failed integrity test and removing invalid system software image. When I try to upload the new software it says processing and validating system software upload.... then says an error occurred uploading the requested software image.


When I use WOS to push out the upgrade:

Begins the upgrade process - connecting to Access Point, shows 0% completed,
then says sleeping for 5 seconds before retrying transfer.
Then it tries the entire process again 5 times with the same results etc...
Eventually it says Failed Upgrading Access Point OS: timed out 5 times while attempting to transfer files.

I've reboot the AP's, power cycled them, restored factory defaults etc... Anyone have any ideas why I can't upgrade the software?

Last edited by cook166; 06-13-2017 at 10:47 AM.
Reply With Quote