View Single Post
  #1  
Old 03-16-2015, 04:24 PM
gordan gordan is offline
Member
 
Join Date: Apr 2011
Posts: 5
gordan has 10 reputation points
Question VPN Avaya SR 2330/4134

Hi all!

I have problem finishing my configuration of VPN over ADSL PPPoE between Avaya SR 4134 (RouterA) and Avaya SR 2330 (Router B). Equipped with VPN cards, Firmware version 10.3.6.0, License SR.

I have configured interfaces: Ethernet LAN/WAN, Tunnel and Virtual-Access.
The GRE tunnel is up and the OSPF builds the routing table.
IKE and IPSEC are configured.

At the moment I can access Internet with both routers and with computers connected on their LAN interfaces.
I can ping the LAN interface on router B from router A and vice versa.

The problem is that I can't access/ping computers that are connected on the other end of the tunnel. I can't ping computers connected on LAN-B from router A or from computers connected on LAN-A and vice versa.

Both configurations are in attach.

Do I need to add a route or same NAT policy, not sure...


Any idea will be appreciated,
Thanks!
Attached Files
File Type: txt AVAYA_SR_4134.txt (3.8 KB, 19 views)
File Type: txt AVAYA_SR_2330.txt (3.8 KB, 23 views)
Reply With Quote