G450 Upgrade
Connect a cross-over cable between "ETH LAN" port "5" and your laptop. (or just connect your laptop on network)
* Configure an IP address for you laptop within the range of the gateway.
* Install and configure a TFTP Server on your laptop(Make sure local laptop firewall allows TFTP)
* Copy the firmware into a folder which you specified for firmware in the TFTP Server 2000 setup.
* To copy MGP firmware type the below:
copy tftp SW_imageA "filename" IP address (laptop IP)
"copy tftp SW_imageA g450_sw_28_22_1.bin 172.27.25.190"
"copy tftp SW_imageB g450_sw_28_22_1.bin 172.27.25.190"
* At the prompt proceed by selecting "yes".
* Type "show download software status 10" to see the firmware download progress.
* Type "show image version" to see the firmware version.
|