View Single Post
  #1  
Old 01-28-2015, 08:25 AM
eyerh66 eyerh66 is offline
Hot Shot
 
Join Date: Nov 2011
Posts: 20
eyerh66 has 10 reputation points
Default Low Volume Issue

I have a few users that are having the following issue: When one of our users is talking with someone over our local phone lines, it sounds as if our users voice is being partially muted. When I do a test call with one of the folks having the issue directly from my desk phone (extension to extension), the volume sounds fine but when I call with a business line that does not go through our PBX, I get the muted volume issue. Our service from Windstream is SIP and I put in a request with them but they said that volume would be an all or nothing issue if it was something on their end. They did make a few QoS adjustments which unfortunately did not change anything. The three users that have reported the issue are all digital sets but are not on the same card or even in the same cabinet. So my question is: Is there anything in the PBX that can be adjusted on an extension by extension basis? Any other ideas? Thanks!
Reply With Quote