View Single Post
  #2  
Old 01-24-2020, 08:32 AM
thiel2 thiel2 is offline
Genius
 
Join Date: Apr 2013
Posts: 353
thiel2 has 50 to 99 reputation pointsthiel2 has 50 to 99 reputation pointsthiel2 has 50 to 99 reputation pointsthiel2 has 50 to 99 reputation points
Default

So you must already have some kind of short codes set up so that when you dial extensions on the remote pbx it routes through the 2nd PRI?

For instance, if your local extensions are all in the 1000's, and the remote extensions are all in the 2000's, you would have a short code like 2XXX / Dial / 2N / {outgoing line group ID on the 2nd PRI}

On the Incoming Call Route for the DID in question (coming in on the 1st PRI) you just type the 2000 extension number into the destination field, and the IP Office will do the routing automatically.
Reply With Quote