Sorry, my bad, its an Avaya 9335 (aka Interquartz Gemini) I have with a power supply.
That works fine on my system with a nice large bright lamp.
I also found and connected a 6218. That works if the MWI setting is set to 51V Stepped (the IP Office default for the US locale). The light is clearly visible though it is a dot rather than the whole of that piece of plastic shining (ie. a bit underwhelming after the 9335).
I did find that despite what is says in the Manager, when I made any changes to the MWI setting it required a system reboot rather than a merge for the changes to take effect.
|