View Single Post
  #2  
Old 10-20-2020, 08:57 AM
thiel2 thiel2 is offline
Genius
 
Join Date: Apr 2013
Posts: 359
thiel2 has 50 to 99 reputation pointsthiel2 has 50 to 99 reputation pointsthiel2 has 50 to 99 reputation pointsthiel2 has 50 to 99 reputation points
Default

It depends on if the calls are answered by the Automated Attendant, or a specific mailbox.

Programming is done from Ext. 10 or 11
Feature 00
Left Intercom twice
Dial #206-7-01 and look at the 2nd line of the display.

Choices are 1-Assigned, 2-Not Assigned, 3-VMS Line Cover
Don't change anything, just make note of it

Now dial #208-01 and look at the 2nd line of the display
Choices are Data -- or Data followed by an extension number

IF #208-7-01 is 1-Assigned, then dial #506-1-01 and enter the number of rings from 0 to 9 for the phones to ring before the Automated Attendant answers

IF #208-7-01 is 2-Not Assigned or 3-VMS Line Cover, AND #208-01 shows an extension number, dial #320 followed by the extension number shown in #208, followed by the number of rings from 1 to 9, AND dial #321 followed by the extension number shown in #208 followed by the number of rings from 1 to 9

You will have to do this for each of your lines, where you are inputting "01" above, that is Line 1. For Line 2 you input "02", etc. If you find anything different, or this doesn't make sense once you go into programming, post back
Reply With Quote