View Single Post
  #1  
Old 07-17-2015, 10:03 AM
jgardu jgardu is offline
Member
 
Join Date: Feb 2015
Posts: 5
jgardu has 10 reputation points
Exclamation Issues with Dial plan on IPO Server edition 9.0.7

Hola, I have a series of issues with the dial plan on this equipment

the issues are:
*Delay until up to 7 seconds to start call (even if the trunk channel was taken inmediately)
*Due some international telephones have different number of digits we tried to create specific dialings like 900xxxxxxxxxxx (00+11digits), 900xxxxxxxxxxxx (00+12digits), etc. this was made to avoid pressing # at the end of dialing the international number (due the client do not want to press #) but is not working so we leave this type of dialing using 900N; forcing the user to press # at the end of the dialing.

On the server we programmed the shortcode ? to dial . (any dialing) and send it to the phisycal resources (E1) on the expansion module (IPO 500v2) vía H.323. trunk, then we created the rest of the dial plan in the last equipment (qhere the E1 card is installed) but is not working.

We had to replicate the dial plan on the server, the second expansion module (ipo500v2) and on the first expansion module (ipo500v2) where the E1 card is installed.

For Example:
-on server (directing calls to trunk ID 99901 (h.323 to expansion 1))
LOCAL Calls: 9xxxxxxx - to dial:9xxxxxxx
National LD Calls: 901xxxxxxxxxx - to dial:901xxxxxxxxxx
USA Calls: 9001xxxxxxxxxx - to dial:9001xxxxxxxxxx
WORLD Calls: 900N; - to dial:900N;

IPO Expansion 1 (where the E1 card is) (directing calls to trunk ID 1 (E1))
LOCAL Calls: 9xxxxxxx - to dial: N;
National LD Calls: 901xxxxxxxxxx - to dial: 01N;
USA Calls: 9001xxxxxxxxxx - to dial: 001N;
WORLD Calls: 900N; - to dial: 00N;

Please help us to find an explanations due we made several tests and dialings but only worked this way.

thanks in advance
Reply With Quote