View Single Post
  #3  
Old 03-26-2010, 10:47 AM
philipmyers philipmyers is offline
Aspiring Member
 
Join Date: Mar 2010
Posts: 2
philipmyers has 10 reputation points
Default

This is procedure we ended up using:

Backup/Restore Procedure for Telephony Test Lab S8300 Systems


1. Boot into Rescue Mode
1. Connect a RJ45 crossover cable from the S8300’s SERVICE LAN port to LAN port on the PC.
2. Configure the PC for IP Address of 192.11.13.5/31.
3. Connect the USB drive with the Linux Partitions to the S8300 via USB cable.
4. Insert the Communication Manager 4.0.2 disk into the S8300’s external DVD-Rom Drive and request the Telephony Admin’s to boot the System.
5. Telnet from the PC to 192.11.13.6.
6. When presented with the Installation Menu on S8300, select “Linux Rescue”.
7. mkdir /usb
8. mount /dev/sdb4 /usb

2. Backup S8300 System:
1. dd if=/dev/sda of=/usb/dlis5.mmdd bs=4096

3. Restore S8300 System:
1. dd if=/usb/dlis5.mmdd of=/dev/sda bs=4096
Reply With Quote