View Single Post
  #2  
Old 02-09-2012, 03:16 AM
aa1 aa1 is offline
Guru
.
 
Join Date: Feb 2010
Location: Budapest - Hungary
Posts: 185
aa1 has 24 reputation pointsaa1 has 24 reputation points
Default G450 DSP Maximum Confusion

Hi cwculwell,

The G450 prior to release 5.2.1 supports up to 240 channels. in G450, a single DSP childboard supports either 20 or 80 VoIP channels. The G450 supports up to four VoIP DSP childboards. Two types of childboard are supported, one providing 80 active VoIP channels and the other providing 20 active VoIP channels. The maximum number of active channels supported is 320.


Some additional details:

Branch Gateway specification
6.1 03-602058 Issue 4 November 2010
Page 12
http://support.avaya.com/css/P8/documents/100120633
The G450 is a scalable device with a basic configuration consisting of one power supply unit (PSU) and 256 MB RAM, and a single DSP childboard supporting either 20 or 80 VoIP channels. This configuration can be enhanced by adding a redundant PSU, up to two RAM modules of 1 GB each, and up to three additional DSP childboards, increasing the number of VoIP channels to 320 channels



Avaya Aura™ Communication Manager System Capacities Table
Release 6.0 03-300511 Issue 7 June 2010
Page 79, [end note 124]
http://support.avaya.com/css/P8/documents/100092572
Each MP20 provides 25 channels for G.711 or G.726 but only 20 channels for G.729.
Each MP80 provides 80 channels independent of codec. There are four slots for MP
boards. The maximum of 320 active channels requires 4 MP80s



Installation and Upgrades for the Avaya Branch Gateway G450
6.1 03-602055 Issue 8 February 2012
Adding or removing VoIP modules: MP20 and MP80 (Page 95)
http://support.avaya.com/css/P8/documents/100120629



Hope this helps
Arbi
Reply With Quote