View Single Post
  #2  
Old 11-21-2014, 03:01 PM
thiel2 thiel2 is offline
Genius
 
Join Date: Apr 2013
Posts: 356
thiel2 has 50 to 99 reputation pointsthiel2 has 50 to 99 reputation pointsthiel2 has 50 to 99 reputation pointsthiel2 has 50 to 99 reputation points
Default

Go to System, Telephony Tab, Ring Tones sub tab, in the box for Ring Tone Plan, click on the box under Name, and type in something like Ring Tone 1. Select the Ring Tone from the drop down box, such as Classic Tone 1, click on OK

Go to Line, and set the Incoming Group ID different for each line, such as 1 for Line 1 and 2 for Line 2

Go to Incoming Call Route, Right Click and New, Bearer Capability is Any Voice, Line Group ID is 1 or 2 Ring Tone Override is either None for the regular Ring Tone, or Ring Tone 1 for the tone you just created. Make an Incoming Route for EACH line. Set Line 1 to None and Line 2 to Ring Tone 1.

I would also use the Tag in the Incoming Call Route to say Line 1 or Line 2
Reply With Quote